features low cost low leakage low forward voltage drop high current capability mechanical data case:jedec do--41,molded plastic terminals: axial lead ,solderable per mil- std-202,method 208 polarity: color band denotes cathode weight: 0.012 ounces,0.34 grams mounting position: any ratings at 25 ambient temperature unless otherwise specified. single phase,half wave,60 hz,resistive or inductive load. for capacitive load,derate by 20%. mur 110 mur 115 mur 120 mur 130 mur 140 mur 150 mur 160 units maximum recurrent peak reverse voltage v rrm 100 150 200 300 400 500 600 v max imum rms v oltage v rms 70 105 140 210 280 350 420 v maximum dc blocking voltage v dc 100 150 200 300 400 500 600 v maximum average forw ard rectified current 9.5mm lead length, @t a =75 peak forw ard surge current 8.3ms single half-sine-w ave superimposed on rated load @t j =125 maximum instantaneous forw ard voltage @ 1.0a v f 1.25 v maximum reverse current @t a =25 at rated dc blocking voltage @t a =100 maximum reverse recovery time (note1) t rr ns typical junction capacitance (note2) c j pf typical thermal resistance (note3) r ja /w operating junction temperature range t j storage temperature range t stg 3. thermal resistance f rom junction to ambient. a 0.875 1.2 50 22 25 50 a do - 41 m ur 10 5 --- m u r 1 6 0 super fast rect ifier voltage range: 50 --- 600 v current: 1.0 a a 10.0 easily cleaned with alcohol,isopropanol and similar solvents i f(av) 1.0 the plastic material carries u/l recognition 94v-0 maximum ratings and electrical characteristics mur 105 50 35.0 35 50 i r i fsm 100.0 2. measured at 1.0mhz and applied rev erse v oltage of 4.1v dc. - 55 ----- + 150 - 55 ----- + 150 note: 1. measured with i f =0.5a, i r =1a, i rr =0.25a. www.shunyegroup.com.cn
50 1.0 75 1.25 1.5 25 100 125 150 175 0 0.75 0.5 0.25 single phase half wave 60h z resistive or inductive load 0.375"(9.5mm)lead length 0.04 0.06 0.02 4 20 0.01 0.1 0.2 0.4 0.6 1 2 6 10 0.7 0.9 0.5 1.1 1.3 1.5 t j =25 pulse width=300 ratings and characteristic curves amperes instantaneous forward current average forward current junction capacitance. pf reverse voltage,volts t j =25 f=1.0mhz 1 2 4 6 10 20 40 60 100 0.1 0.2 0.4 1 2 4 10 40 100 20 www.shunyegroup.com.cn
micro amperes amperes notes:1.rise time = 7ns max.input impedance = 1m .22pf. jjjjj 2. rise time =10ns max. source impedance=50 . mur105 --- mur160 percent of rated peak reverse voltage, % number of cycles at 60hz fi g. 6 -- test ci rcui t di agram and reverse recovery time characteri sti c fig. 4 -- typi cal reverse characteri sti cs instantaneous reverse leakage current fi g. 5 -- peak forward surge current set time base for 10/20 ns/cm ratings and characteristic curves peak forward surge current 20 40 .01 .02 60 80 100 120 .04 .1 t a =100 ?? .2 .4 1 2 10 4 40 20 100 140 t a =25 ?? t a =150 ?? 1 2 0 10 30 4 10 20 40 50 60 20 40 100 8.3ms single half sine-w ave -1.0a -0.25a 0 +0.5a t rr 1cm 10 n 1. 1 nonin- ductive 50 n 1. (+) 25vdc (approx) (-) d.u.t. pulse generator (note2) oscilloscope (note 1)
|